Niche shelf with a massive character vol.1

A shelf like something out of a modern living magazine: big, open, made of solid oak wood and – priceless? No, it is not priceless, because we know the right tricks…

Secure, a solid oak shelf would cost a small fortune, but who makes the floors out of pine wood, stained on oak and then fitted with a solid oak strip, gets a shelf, which looks deceptively real like solid oak. The cost per shelf is approx 28 Euro for glued pine wood and strips and additional 22 euros for the oak strip (29 x 48 mm from the wood store). An oak board would cost about twice as much!

But what else does our shelf have to offer?: It is equipped with lighting and a spacious compartment. The compartment is located within the niche wall under the bottom shelf. Here you can blankets, Accommodate extra pillows or guest bedding for the sofa bed. And who has no niche, he reads from the page 14, how to build a shelf body, which looks like a niche.

This creates a solid shelf.

For this shelf you need shelves of great thickness, so that the proportions of length and thickness are correct. But wood is expensive. Especially hardwood species such as oak, With such dimensions, ash or elm from the elm can really take a toll on your wallet.

But there is a trick: You take glued wood boards made of pine or spruce for the surfaces and provide them with a solid hardwood edge band. We decided on oak wood and the softwood boards now have to be matched to the oak wood color with a stain. But before the stain is applied, the coniferous wood must be watered. When watered, wood fibers soak up water and rise from the surface, which is then sanded smooth again. Otherwise the fibers would soak up the stain and give off a rough surface, which would be difficult to grind.

1 Vor dem eigentlichen Beizen müssen die Kiefernholzbretter gewässert und geschliffen werden. Use lukewarm water and a household sponge. After drying, the entire board is then sanded with 120 grit sandpaper. Repeat this process a second time.

2 Aufträgen der Beize mit einem metallfreien Pinsel.

3 Die Distanzhölzchen auf das Kiefernholzbrett leimen.

4 Die zweite Platte wird aufgeleimt. In order to transfer the pressing pressure evenly to the plate, use so-called supplements of wood. These are smooth sections of wood, which also prevent the impression marks of the clamp.

5 Anleimen des etwa 2,5 cm thick strips of oak wood.

6 Die Regalböden sind so konstruiert, that she is on about 1 cm thick strips can be pushed on. The strips are attached as shown in the drawing

Leave a Reply

Your email address will not be published. Required fields are marked *